Masks have now become an integral part of our daily lives. People basically wear masks whenever they go out to protect themselves. They keep the masks on at all times. However, there are numerous types of masks available on the market, and each type is made of different materials. Plain masks can be classified as: cotton masks, non-woven fabric masks, polymer material masks, activated carbon powder filter core masks, activated carbon fiber felt pad masks, etc. So today, I will take non-woven fabric masks as an example and explain in detail the various specifications of non-woven fabric masks.

Generally, non-woven fabric masks are made using 15g, 20g, 25g, and 30g PP non-woven fabric. The size specifications for adult masks are 18*9, while those for children's masks are 15*9.

Now let's specifically talk about the data specifications of non-woven fabric masks:

1. When unfolded, the central part of a regular mask: the length should be no less than 17cm, and the width should be no less than 17cm;

2. The size of a close-fitting arched mask: its length should not be less than 14cm, and its width should not be less than 14cm;

3. The nose clip is made of bendable and deformable materials, and its length should be no less than 8.5cm;

4. The size of a three-layer non-woven fabric mask is 17.5mm x 19.5mm.

In fact, when we wear masks nowadays, it is mainly to isolate dust, smog, and bacteria and other pollutants. Due to the different protection requirements now, the classification of masks is also different. Ordinary flat masks are generally composed of three layers, with the upper and lower layers being PP non-woven fabric and the middle layer being melt-blown fabric. N95 masks are composed of needle-punched cotton, melt-blown fabric, and non-woven fabric. The melt-blown fabric usually uses 40g or higher weight, along with the thickness of the needle-punched cotton, so it looks thicker than the flat mask in appearance. Of course, its protective effect is also very good and optimistic, at least it can reach 95%.

Non-woven fabric and melt-blown fabric are indispensable raw materials for making masks. Among them, melt-blown fabric mainly plays the roles of isolation and filtration in masks. Especially in this special period, if you wear a mask with melt-blown fabric, it can effectively protect your body and effectively protect your health.

This is the relevant size specifications and related mask knowledge about non-woven fabric masks. When you are producing and manufacturing, you can refer to this data. Of course, what the author is saying is just a reference data. There are still some situations that need to be determined according to the actual market conditions. Jiangmen Duomei Non-woven Fabric Co., Ltd. is a professional non-woven fabric enterprise for medical and health materials. Its main products include: hydrophilic non-woven fabric, water-repellent and skin-friendly non-woven fabric, various pore types of hydrophilic perforated non-woven fabric, and various pressure points non-woven fabric front waist straps. The company's products are widely used in healthcare, maternal and child hygiene products, adult diapers, etc. Welcome everyone to purchase and consult.

Some of the content of this article is compiled from online sharing. If there is any infringement, please contact the author to delete.